The instruments decide what can be promised

Dense capture of structures and buildings, with an integrated robotic total station. It sets the reference everything else is registered to.

• Robotic total station built into the scanner
• One set-up for both scanning and surveying
• Complete capture of architectural detail
• Supplied with a Trimble T1 field tablet

Mobile mapping of complex interiors and large volumes, captured on the move. Georeferenced onto control points surveyed with the SX10.

• Two 16-layer LiDAR sensors and four 20 MP cameras
• 360° capture without the operator in frame
• Georeferencing via total station and GNSS
• Up to 10× faster than a static scanner (manufacturer figure)

Photogrammetric coverage of large extents, where a multirotor would not have the endurance.

• Fixed wing: long endurance, wide coverage per flight
• Programmed flight along a mission plan
• Orthophotos and digital surface models
• Estates, golf courses, developments, long corridors

Small sites, constrained locations and close-range capture, with onboard RTK positioning.

• Vertical take-off and landing on constrained sites
• RTK positioning: fewer ground control points required
• Slow, low flight for fine detail
• Construction monitoring and structure inspection

Detail survey and setting out by a single operator, the robotic instrument tracking the prism.

• Detail survey and setting out
• Geometric control of structures
• Single-operator operation
• Tied to the national coordinate system

The baseline capacity: seven instruments mean several crews can be deployed on separate sites the same day.

• Seven instruments deployable simultaneously
• Routine surveys and setting out
• Redundancy when an instrument is out of service
• Crew training on a straightforward instrument

Centimetre positioning and tying surveys into the national system. Five bases and several rovers allow parallel work across sites.

• 5 base and 2 rover Trimble R8S units
• Trimble R12 and R2 for RTX/RTK and static work
• Trimble TSC and TDC field controllers
• Registration of drone missions and SLAM captures

Capture is only half the work. Point clouds and survey data are processed in house, through to A0 plotted drawings.

• Trimble Business Center Advanced Survey
• NavVis Desktop SiteMaker for SLAM data
• AutoCAD and COVADIS for drawing production
• A0 plotters and large-format scanner in house

Not a detail: the lead time we quote depends on how many crews can leave the same morning.

• 5 Renault Kangoo for survey crews
• 1 Skoda Kodiaq for long-distance travel
• Several sites covered simultaneously
• Deployment across the whole country